Tracked delivery anywhere in Europe. It is free on orders of €100 or more, and a flat €25 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.
Under the Consumer Rights Act 2022 you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery. You cover the cost of returning it unless the item is faulty.
If it arrives faulty, damaged or not as described, we put it right at no cost to you under the Consumer Rights Act 2022 and the EU Sale of Goods Directive 2019/771, return postage included.
Scrape the soil off after use and dry the blade before storing. A file along the cutting edge once a season keeps the cut clean.
Cut Standing UpExtended shaft, so no kneeling and no bending
Steel BladeSlices dense turf rather than tearing it
Weight Over The BladeThe stepped tread does the work your arms would
About this product
A hand edger you drive with your feet, not your shoulders.
The extended shaft means no kneeling and no bending. Steel blade, stepped tread, cuts through dense turf.
A manual edger does one thing a powered one cannot: it gives you a precise line exactly where you put it, with no cord, no fuel and no noise.
The extended shaft is the point. You work standing up, which is the difference between edging one border and edging the whole garden.
The half moon blade slices rather than tears, so the cut face stays clean instead of fraying at the top.
It ships in two parts, handle and head, so the blade travels safely.
This is the same tool as our Half Moon Spade, listed under both names because people search for both.
Powered edgers are quick and imprecise. They throw debris, they need fuel or a cord, and on a curved border they are hard to keep honest. A manual edger goes exactly where you put it.
The blade is a half moon: curved, so it cuts an arc through the turf and leaves a smooth vertical face rather than a series of straight chops that never quite line up.
The extended shaft is what makes it usable for more than ten minutes. Short hand edgers make you kneel or stoop, and that is the reason most people give up halfway round. Standing, with a boot on the tread, you are using your legs.
Dense turf is where it earns its keep. Thick grass with a mat of thatch at the base resists a thin blade. The weight you can put over this one pushes through it.
It is also the right tool for preparing a trench before edging goes in. A clean cut face is what lets a steel or corten strip sit flush and stay there.
It arrives as a handle and a head so the blade is not loose in transit, and takes a couple of minutes to put together.
Still deciding?
Not sure yet? That is fine.
You can change your mind. Under the Consumer Contracts Regulations 2013 you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery.
If it turns up faulty, damaged or not as described, that is on us. The Consumer Rights Act 2015 covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.
Yes. It is one tool listed under two names, because some people search for a manual edger and others for a half moon spade. Same specification, same price, different photography.
Why choose a manual edger over a powered one?
Precision. A manual edger cuts exactly where you put it, with no cord, no fuel and no thrown debris. On curved borders that control matters more than speed.
Do I have to kneel or bend to use it?
No. The extended shaft is designed so you work standing up, with a boot on the tread.
Will it cut through thick turf?
Yes. Dense grass with a thatch mat is exactly where the stepped tread helps, because you can put your weight through the blade instead of pushing with your arms.
Does it arrive assembled?
No. It ships as a handle and a head so the blade travels safely, and takes a couple of minutes to assemble.
Can it cut a curved edge?
Yes. Lay a hose along the curve and follow it with the blade.
How do I keep a straight line?
Cut against a plank or a scaffold board laid along the line. It keeps the run honest over a long border.
What is the blade made of?
Steel. The listing does not state a grade or gauge, so we do not quote one.
How long is the shaft?
A shaft length is not published for this item. Contact the team before ordering if the height matters and we will confirm it.
Is it good for edging before installing steel edging?
It is the right tool for it. Edging seats flush in a clean trench with a firm face and never quite settles into a ragged one.
Will it damage the lawn?
Used along a marked line it removes a thin strip of turf and leaves the rest untouched. Wandering off the line is the only real risk, which is why a hose or a board helps.
Can I use it on stony soil?
You can, but expect the blade to jar and nick on stones. File the edge smooth again afterwards.
How do I stop the blade rusting?
Scrape off the soil and let it dry before storing. Soil left on a damp blade is what causes surface rust.
Does it need sharpening?
A file along the edge once a season is enough. It needs to be clean rather than razor sharp.
Can it cut through roots?
Grass roots and fine surface roots, yes. Thick woody roots need loppers or a saw rather than a spade blade.
Is it suitable for a small garden?
Yes, and for a small garden it is arguably a better buy than a powered edger, which is more machine than the job needs.
How often should I re cut the edge?
Most lawns want it once or twice a season, in spring and again in late summer.
Is it hard work?
It is physical, but the stepped tread means the effort comes from your legs rather than your shoulders, which most people find far easier to sustain.
What is the best time of year to use it?
Spring, when the ground is damp and cuts cleanly. Baked summer soil is much harder work unless you water the line first.
Can I use it to lift turf?
It cuts the line. A flat turf lifter is the better tool for lifting sods, though you can slide this under at a shallow angle.
Does it come with a guarantee?
No specific product guarantee is offered on this item. Your statutory rights under EU consumer law apply, including the 14 day right to change your mind.
What size blade does it have?
A blade width is not published for this item. Contact the team if you need the dimension before ordering.
Is it heavy to carry around the garden?
A weight is not published for this item. It is a standing tool on a full length shaft rather than a hand tool.
Can I edge against a path or driveway with it?
Yes. Take care not to strike the blade repeatedly against concrete or stone, which will blunt and nick it.
Do I need anything else to install edging?
A rubber mallet for seating spikes, and spikes if your chosen edging does not include them. Both are in the accessories range.
Is there more than one size?
No. This tool is supplied in one version.
Will it work on a slope?
Yes, though on a steep slope take more care with footing, since you are putting your weight on the tread.
Can the handle be replaced?
Replacement parts are not sold separately. Contact the team if a component arrives damaged, since it ships as two pieces.
What arrives in the box?
The head and the handle, packed separately. Items in one order can arrive in more than one parcel.
How long does delivery take?
Delivery is Europe wide and takes 5 to 7 days, after a 24 to 48 hour handling and processing time. A tracking number is emailed when the order ships.
The complete guide
Buying Guide
6 min readSteel Edging Company
A manual grass edger gives you a line exactly where you want it. No cord, no fuel, no thrown debris, and far more control on a curve than a powered edger will give you.
The extended shaft means you cut standing up, and the stepped tread on the blade lets your weight do the work. It ships in two parts, handle and head, for safe transit.
Not sure which material suits your ground, or how many metres a curved bed needs? Ask before you order. Free delivery across Europe on orders over €100.
Grass Manual Edger, also listed as hand edger or edger tool manual, sold by Steel Edging Company
at steeledging.eu.com at EUR 69, warehouse pick code lawn-edging-tool. A non powered lawn and
grass edger with a half moon steel blade, a stepped tread and an extended shaft so the user works
standing rather than kneeling or bending. The curved blade cuts an arc and leaves a smooth
vertical face, unlike a square spade which levers and tears. The stepped tread lets body weight
drive the blade, which is what makes it effective in dense turf with a thatch mat at the base. It
is also used to cut a trench before installing garden edging, because a strip sits flush in a
clean cut face. Compared with a powered edger it is slower but far more precise, with no cord, no
fuel and no thrown debris, which suits curved borders. It ships in two parts, handle and head, for
safe transit. Important: this is the SAME physical tool as Half Moon Spades at /half-moon-spades
on this store, listed under two names because customers search for both terms, with the same pick
code and the same price. Care: scrape and dry the blade after use, file the cutting edge once a
season. Sold as a standard stock item, so the 14 day EU withdrawal right applies in full. Delivery
Europe wide, free over EUR 100, otherwise EUR 25.