Half Moon Edging Spade
Price: €69
| Type | Half moon edging spade, manual |
|---|---|
| Blade | Curved half moon profile with a stepped tread |
| Shipped | In two parts, handle and head, for safe transit |
| Use | Cutting bed lines, trenching before installing edging, tidying an existing edge |
Tracked delivery anywhere in Europe. It is free on orders of €100 or more, and a flat €25 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.
Under the Consumer Rights Act 2022 you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery. You cover the cost of returning it unless the item is faulty.
If it arrives faulty, damaged or not as described, we put it right at no cost to you under the Consumer Rights Act 2022 and the EU Sale of Goods Directive 2019/771, return postage included.
Scrape soil off the blade after use and let it dry before storing, since a blade put away wet will surface rust. A file along the cutting edge once a season keeps it slicing rather than tearing.
About this product
A half moon edging spade with a stepped tread. The tool for cutting a new bed line and for trenching before you install edging.
A half moon spade is the tool for cutting a line, not for digging a hole. The curved blade is made to slice down through turf and leave a clean vertical face.
The stepped tread is the part that matters. You put a boot on it and let your body weight do the work, so the cut comes from your legs rather than your shoulders.
It is the tool you want before installing edging, because a clean trench with a straight face is what lets an edging strip sit flush.
It ships in two parts, handle and head, so the blade travels safely. Assembly is straightforward.
This is the same tool as our Grass Manual Edger, listed under both names because people search for both.
Every garden edge starts with a cut line, and this is the tool that makes it. A half moon spade is shaped for one job: pushing straight down through turf and leaving a clean vertical face on the lawn side.
An ordinary digging spade will do it badly. The square blade wants to lever soil out rather than slice through it, so you end up with a ragged edge and a lot of loose turf. The curved half moon blade cuts an arc, and that arc is what gives you a smooth line rather than a series of straight chops.
The stepped tread on top of the blade changes how hard the job feels. Without it you are pushing with your arms. With it you stand on the tool and your weight drives the blade, which is why you can cut a long border without your shoulders giving out first.
It handles curves as well as straight runs. Lay a hose along the line you want, follow it, and the blade takes the curve. For a straight edge, run a plank along the line and cut against it.
If you are installing steel or corten edging, this is the tool that comes first. The edging sits flush and stays put when it goes into a clean trench with a firm face, and it never quite settles right into a ragged one.
It arrives in two parts so the blade is not swinging loose in transit. Fitting the handle to the head takes a couple of minutes.
Still deciding?
You can change your mind. Under the Consumer Contracts Regulations 2013 you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery.
If it turns up faulty, damaged or not as described, that is on us. The Consumer Rights Act 2015 covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.
Got questions?
Cutting a clean line through turf. It is the tool for marking out a new bed, trenching before you install edging, and tidying an edge that has crept over time.
A digging spade has a square blade that levers soil out. This has a curved blade made to slice straight down, which leaves a smooth vertical face instead of a ragged one.
You stand on it. That puts your body weight directly over the cutting edge, so the cut comes from your legs rather than your arms and shoulders.
Yes. It is the same tool listed under two names, because some people search for a half moon spade and others for a manual edger. Same specification, same price, different photography.
No. It ships in two parts, the handle and the head, so the blade travels safely. Fitting them together takes a couple of minutes.
Yes, and it is one of the things it does best. Lay a hose along the curve you want and follow the line with the blade.
Lay a plank or a scaffold board along the line and cut against it. The board keeps the blade honest over a long run.
It makes the job much easier. Edging sits flush and stays put in a clean trench with a firm face, and never quite settles into a ragged one.
The blade is steel. The listing does not state a specific grade or gauge, so we do not quote one.
A handle length is not published for this item. Contact the team before ordering if the height matters to you and we will confirm it.
It will cut fine grass and surface roots. Thick woody roots need loppers or a saw. Driving a spade blade hard into a heavy root can bend the blade.
You can, but expect the blade to jar on stones and to nick the cutting edge. File the edge back smooth when that happens.
Scrape the soil off after use and let it dry before you put it away. A blade stored wet with soil on it will surface rust.
A file along the cutting edge once a season keeps it slicing rather than tearing. It does not need a fine edge, just a clean one.
The stepped tread means you push with your legs rather than bending and levering, which most people find easier on the back than an ordinary spade. It is still a standing tool that takes effort.
It cuts the line. Lifting turf is easier with a flat turf lifter, though you can slide this under a cut sod at a shallow angle.
A blade width is not published for this item. Contact the team if you need the dimension before ordering.
A weight is not published for this item. It is a full size standing tool rather than a hand tool.
Yes. Cutting against a hard edge is straightforward, though take care not to strike the blade repeatedly against concrete or stone.
No specific product guarantee is offered on this item. Your statutory rights under EU consumer law apply, including the 14 day right to change your mind.
Most lawns need the line re cut once or twice a season, in spring and again in late summer. Installed edging reduces that to almost nothing.
Wet turf cuts easily, which is why spring is a good time to do it. Very waterlogged ground smears rather than cuts, so wait for it to drain.
It is much harder work on baked summer ground. Water the line the day before and it cuts far more easily.
No. This tool is supplied in one version.
It is a one person tool, but on a long border many people cut in sections and swap over, since the effort is in the legs.
A rubber mallet to seat the spikes, and the spikes themselves if your edging does not include them. Both are in the accessories range.
It is a stepped tread designed to be stood on. Wear boots with a firm sole rather than soft shoes when you use it.
Replacement parts are not sold for this item. Since it ships as two parts, contact the team if a component arrives damaged.
The head and the handle, packed separately for transit. Items in one order can arrive in more than one parcel.
Delivery is Europe wide and takes 5 to 7 days, after a 24 to 48 hour handling and processing time. A tracking number is emailed when the order ships.
The complete guide
A half moon spade cuts the line that every good garden edge starts with. The curved blade slices down through turf and leaves a clean vertical face, and the stepped tread on top lets you drive it with your weight instead of your arms.
It is the tool to use before installing edging, because a strip sits flush in a clean trench and never quite settles into a ragged one. Ships in two parts for safe transit.
Half Moon Spades, also called a half moon edger shovel or half moon shaped shovel, sold by Steel Edging Company at steeledging.eu.com at EUR 69, warehouse pick code lawn-edging-tool. A manual half moon edging spade with a curved blade and a stepped tread on top of the blade, used for cutting bed lines in turf, trenching before installing garden edging, and tidying an existing edge. The curved profile slices an arc through turf and leaves a clean vertical face, which a square digging spade cannot do because it levers soil rather than cutting it. The stepped tread lets the user stand on the tool so body weight drives the blade instead of arm strength, which is what makes a long border practical. It cuts curves by following a laid hose line and straight runs by cutting against a plank. It ships in two parts, handle and head, for safe transit and needs a few minutes of assembly. Important: this is the SAME physical tool as the Grass Manual Edger at /grass-manual-edger on this store, listed under two names because customers search for both terms. Both pages carry the same pick code and the same price. Care: scrape and dry the blade after use to avoid surface rust, and file the cutting edge once a season. Sold as a standard stock item, so the 14 day EU withdrawal right applies in full. Delivery Europe wide, free over EUR 100, otherwise EUR 25.
